QHSE Support - (Site Map) TIRA > Installation Guides >  > MD5 Checksums 

How to Calculate and Verify MD5 Checksum of On Safe Lines QHSE Software Installation Files

 

Introduction

 

Sometimes you may need to make sure that an installation file was downloaded flawlessly. The best way to authenticate a file is to calculate its checksum and compare it with that of the original one.

 

The original checksum of an installation file for your product can be checked in on the <downloads section> of On Safe Lines website.

 

 

MD5 Checksum Solution

 

Read the following instructions on using the CheckSum Calculator to calculate the checksum of your download file:

 

> Download the <Free CheckSum Calculator> and install:

 

> Run the application:

 

> Browse to the file (where you download the software to on your PC) then click Calculate to generate the MD5 number:

 

MD5 Checksum Calculator

 

 

> Now you can compare MD5 checksum with the original one from the download page of our website to make sure the files are identical.

 

 

> If Download successful

 

 

MD5 Checksum Calculator correct

 

 

> If Download unsuccessful (please try to download again)

 

MD5 Checksum Calculator error

 

If the MD5 checksum does not match the codes published on our <download page>, you will need to download the set-up file again.  To ensure a flawless download we recommend using a <download manage>r with a resume on disconnection ability. 

On Safe Lines  - Help file v7.3.01.04 : Copyright © 2020 On Safe Lines QHSE Software